JVC LET0239-001A Instructions Manual page 72

72
To change the programme position number
assigned to a station
1
Show the confirmation screen for Manual Channel
Setup.
Press SET UP.
1
Press 3 or 2 to move
2
press ∞.
Press 3 or 2 to move
3
press ENTER.
Press ∞ or 5 to move
4
then press ENTER.
2
/ 2 /
3 ∞ 5
Press / to select a programme position
number in which a station you want to move is
stored, then press ENTER.
The channel number (under "CH") and station name
(under "ID") start flashing.
3
3 / 2 / ∞ 5
Press / to select a new programme
position number for the station you have selected,
then press ENTER.
• Example: If you moved the station in position 4 to
position 2, the stations originally in
positions 2 and 3 are reassigned the new
position numbers.
26 BBC1
23 ITV
30 CH4
33 BBC2
37 CH5
[ENTER]
[SET UP]
4
Repeat steps 2 and 3 as necessary.
5
Press SET UP three times to finish the setting.
to "INITIAL SET UP," then
to "TUNER SET," then
to "MANUAL CH SET,"
26 BBC1
33 BBC2
23 ITV
30 CH4
37 CH5
[ENTER]
[CANCEL]
[SET UP]
CHANGING THE INITIAL SETTINGS (cont.)
To fine-tune the station channel
1
Show the confirmation screen for Manual Channel
Setup.
1 Press SET UP.
Press 3 or 2 to move
2
press ∞.
Press 3 or 2 to move
3
press ENTER.
Press ∞ or 5 to move
4
then press ENTER.
2
/ 2 /
3 ∞
Press
number in which a station you want to fine tune is
stored, then press ENTER.
The channel number (under "CH") and station name
(under "ID") start flashing.
3
Press ENTER again.
The Manual Channel Setup screen appears.
4
Press 3 repeatedly until "+/–" begins flashing.
5
Press ∞ or 5 to fine tune the picture to obtain the
best picture.
6
Press ENTER.
The confirmation screen appears.
7
Repeat steps 2 to 6 to fine tune other stations.
8
Press SET UP three times to finish the setting.
To assign the station names
To assign the preset station names (see the tables on
pages 73 and 74)
1
Show the confirmation screen for Manual Channel
Setup.
Press SET UP.
1
Press 3 or 2 to move
2
press ∞.
Press 3 or 2 to move
3
press ENTER.
Press ∞ or 5 to move
4
then press ENTER.
2
Press ∞ or 5 to select a programme position number
in which a station you want to assign a name to is
stored, then press ENTER.
The channel number (under "CH") and station name
(under "ID") start flashing.
3
Press ENTER again.
The Manual Channel Setup screen appears.
4
Press 3 repeatedly until
the station name (under
"ID") starts flashing.
5
Press ∞ or 5 to select a
new station name.
• Each time you press the
button, preset names
change.
to "INITIAL SET UP," then
to "TUNER SET," then
to "MANUAL CH SET,"
5
/ to select a programme position
to "INITIAL SET UP," then
to "TUNER SET," then
to "MANUAL CH SET,"
[ENTER]
[SET UP]