Asko DW20.1 Service Manual page 35

Adjusting water intake
Press the program selector (S1) for 3 secs to
activate the menu for setting the water intake.
Then step through using the Program button
(S1).
Display shows: 0 Normal water intake volume
Display shows: 1 Water intake volume increases
by 5%
Display shows: 2 Water intake volume increases
by 10%
Display shows: 3 Water intake volume increases
by 15%
Display shows: 4 Time controlled water intake
Display shows: 5 Water intake volume increases
by 5 % time controlled
Display shows: 6 Water intake volume increases
by 10 % time controlled
Display shows: 7 Water intake volume increases
by 15 % time controlled
Confirm selection by pressing Start (S2). The
program returns to the main menu.
W W W W W ater hardness setting ater hardness setting ater hardness setting ater hardness setting ater hardness setting
Activating setting menu:
1. Turn off the main power switch (1/0).
2. Wait at least 5 seconds.
3. Hold Start button (S2) pressed in
4. Switch on the main power switch (1/0).
5. Release Start button (S2)
6. Select the desired water hardness using
the Program button (S1), see the table below.
Setting: Water hardness [°dH]
The display shows: 0
dishwashers with water softeners)
The display shows: 1
The display shows: 2
The display shows: 3
The display shows: 4
The display shows: 5
The display shows: 6
The display shows: 7
The display shows: 8
The display shows: 9
Confirm selection by pressing Start (S2).
The program returns to the main menu.
0-5 (applies to
6-8
9-11
12-14
15-19
20-24
25-29
30-39
40-49
50+
S E R V I C E M E N U S E R V I C E M E N U S E R V I C E M E N U
S E R V I C E M E N U S E R V I C E M E N U
35