Asko DW20.1 Service Manual page 22

Hide thumbs Also See for DW20.1:
Table of Contents

Advertisement

S E T T I N G S
S E T T I N G S
S E T T I N G S
S E T T I N G S
S E T T I N G S
DW20.2
L1 L2 L3
S1
S3
S4
Panel type DW20.2, L = LED, S =Push-button,
S3a Washing in both baskets
Both-basket washing (basic setting). The
machine's upper and lower baskets are loaded
with items to be washed.
b Washing in the upper basket
Most of the process water is directed by the
spray arm divider to the upper spray arm.
c Washing in the lower basket
Most of the process water is directed by the
spray arm divider to the lower spray arm.
S4 Temperature
S4 lights when High temperature is selected
S5 Delayed start
Programme start delayed by 1-12 hours
S6 Drying selection
Long and Normal drying (Quick wash: Long and
No drying).
LED lights when long drying is selected
S7 Express Variant 1 (certain markets)
Reduces the main wash temperature by 10°C,
lowers the rinse temperature and shortens the
drying time.
S7 Super rinsing Variant 2 (certain markets)
Adds two rinses.
22
L4 L5 L6
S2
S5
S6
S7
Variant setting
If the control unit is replaced, the machine will
automatically be in the variant setting menu when
the power supply is switched on for the first time.
Fill the machine with appr. 1 litre of water!
1.
Press the Programme button (S1),
repeatedly until the desired variant is
selected:
Display shows 1:
Variant Express (S7) also valid for 3
buttons.
Display shows 2:
Variant with Super rinse option (S7)
2.
Confirm your choice by pressing Start (S2).
The machine senses the presence of the
turbidity and pressure sensors and the spray
arm divider. The programme then reverts to
the main menu.
If you wish access to the variant setting
again:
1.
Turn off the main switch (I/0)
2.
Wait for at least 5 seconds
3.
Keep the Programme/Start buttons
(S1&S2) depressed
4.
Turn on the main switch (I/0)
5.
Release the Programme/Start buttons
(S1&S2) at once! Proceed with point 6
within 5 sec!
6.
Press Start (S2) three times in a rapid
succession. Indication 1 or 2 flashes in the
display.
7.
Select variant with S1
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dw20.2Dw20.3Dw20.4Dw20.5Dw20.c

Table of Contents