Asko DW20.1 Service Manual page 34

° C Display
0 32
5 40
10 49
15 60
20 71
25 80
30 90
35 101
The table shows the temperature and equivalent
display code
Adjusting water intake
Press Drying/Menu (S4) for setting the water
intake.
Machines manufactured before year 2005
week 16
Press Drying/Menu (S4) to access water intake
setting
Press Temperature/Set (S3) to adjust the water
intake.
Display 0: Normal water intake volume
Display –15 %: Water intake volume is reduced
by 15 %
Display –10 %: Water intake volume is reduced
by 10 %
Display –5 %: Water intake volume is reduced by
5 %
Display Time: Time-controlled water intake
Display +5 %: Water intake volume is increased
by 5 %
Display +10 %: Water intake volume is increased
by 10 %
Display +15 %: Water intake volume is increased
by 15 %
Press Start (S2) to store the setting of the water
intake volume and LCD contrast.
The programme returns to the main menu.
34
°C Display
40 111
45 123
50 134
55 146
60 156
65 167
70 177
75 188
Machines manufactured year 2005 week 16
and later
Press Drying/Menu (S4) to access water intake
setting
Press Temperature/Set (S3) to adjust the water
intake.
Display 0: Normal water intake volume
Display +5%: Water intake volume is increased
by 5%
Display +10 %: Water intake volume is increased
by 10 %
Display +5%: Water intake volume is increased
by 15 %
Display time: Time-controlled water intake
Display Time +5 %: Water intake volume is
increased by 5 %
Display Time +10 %: Water intake volume is
increased by 10 %
Display Time +15 %: Water intake volume is
increased by 15 %
Press Drying/Menu (S4) to access LCD
contrast setting.
Press Temperature/Set (S3 repeatedly) to adjust
the contrast 0, +1, +2, +3, -1, -2, -3.
Press Start (S2) to store the setting of the water
intake volume and LCD contrast.
The programme returns to the main menu.
DW20.5
1. Turn off the main switch (1/0).
2. Wait for at least 5 seconds
3. Keep Program- / Startbutton (S1&S2)
depressed.
4. Turn on the main switch (1/0).
5. Release Program- and Startbutton
(S1&S2) when the diods lights.
Proceed with point 6 within 5 seconds
6. Press Start (S2) 3 times in a rapid
succession.
( 1 or 2 flashes in the display)
7. Select desired variant with Program button
(S1)
Confirm selection by pressing Start (S2). The
program returns to the main menu.