Asko DW20.1 Service Manual page 21

DW20.1
Variant A
L2
L3
L4
L1
L11
PROGRAM
S1
Panel type DW20.1, L = LED, S =Push-button
Temperature selection S3
L6 lights when High temperature is selected
Drying selection S4
Long and Normal drying (Quick wash: Long and
No drying).
(L5 lights when long/extra drying is selected)
Variant setting
If the control unit is replaced, the machine will
automatically be in the variant setting menu when
the power supply is switched on for the first time.
L1 flash: Variant A see above, with no and two
options (temp, drying).
L4 flash: Variant B see above, with one option
(temp).
1. Press the programme button (S1) repeatedly
until L1 or L4 is flashing.
2. Confirm your choice by pressing Start (S2).
(The programme then reverts automatically
the main menu.)
If you wish to access the variant setting menu again:
1. Turn off the main switch (I/0)
2. Wait for at least five seconds
3. Keep the Programme and Start button
depressed (S1&S2)
4. Turn on the main switch (I/0)
5. Release the Programme and Start button
(S1&S2). Proceed with point 6 within 5
sec!
6. Press Start (S2) three times in a rapid
succession. Select variant with programme
button (S1).
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
L2
L12
L7
L1
PROGRAM
START
STOP
S2
S4
L6
Variant B
L12
L4
START
L11
S1
STOP
S2
L10
L5
Water hardness setting
Activation of setting menu
1. Turn off the main switch (I/0)
2. Wait for at least five seconds
3. Keep the Start button (S2) depressed
4. Turn on the main switch (I/0)
5. Release the Start button (S2) L7 starts to
flash
6. Select desired water hardness with the
Programme button (S1)
Setting:
All LEDs are
extinguished
L1 lit
L1-2 lit
L1-3 lit
L1-4
L1-5 +L11 lit
L1-6 +L-11 +L-12 lit
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
Total reset
To reset the machine to its basic settings.
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme button (S1) depressed
4. Turn on the main switch (I/0)
5. Release the Programme button (S1).
The machine now resets various settings, but not
the water hardness and water intake setting. The
machine then reverts automatically to the main
menu.
Variant A
L2
L7
L1
PROGRAM
L8
S1
S3 S4
L9
L5
L6
Water hardness
[°dH]
(German degrees of hardness)
0-5 (incl. machines
without water softener)
6-8
9-14
15-19
20-29
30-44
45+
S E T T I N G S S E T T I N G S S E T T I N G S
S E T T I N G S S E T T I N G S
L12
L7
L4
START
L8
L11
STOP
S2
L10
L9
21