Table of Contents
Advertisement
Quick Links
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfil your needs for many years to
come. Scandinavian design combines clean lines, everyday functionality and
high quality. These are key characteristics of all our products and the reason
they are greatly appreciated throughout the world.
To get the most out of your new dishwasher, we recommend that you read the
operating instructions before using the dishwasher. The operating instructions
also include information on how you can help protect the environment.
Operating Instructions
Dishwasher
ASKO DWC5926
Read the instructions before using the machine.
Advertisement
Table of Contents
Related Manuals for Asko DWC5926
Summary of Contents for Asko DWC5926
- Page 1 Dear Customer, Thank you for choosing this quality product from ASKO. We hope it will meet your expectations and fulfil your needs for many years to come. Scandinavian design combines clean lines, everyday functionality and high quality. These are key characteristics of all our products and the reason they are greatly appreciated throughout the world.
-
Page 2: Table Of Contents
Contents Front panel Troubleshooting Safety instructions Technical information Before washing for the first time Installation Loading the dishwasher Service Using the dishwasher Programme chart Settings Your notes Care and cleaning Front panel To start the machine, press and hold the main power switch until the display lights up. 0:25 1 Programme selector 2 Option Drying... -
Page 3: Safety Instructions
Safety instructions General Child safety Read the operating instructions and keep them in a safe place! Always close the door and start the programme immediately after you have added the detergent. Number of place settings: 13 Keep children away from the dishwasher when the door is Never use the dishwasher for any purpose other than that open. -
Page 4: Before Washing For The First Time
Before washing for the first time Automatic dosing system Top up with salt The dishwasher can be connected to an automatic dosing system Before you begin using a dishwasher with a water softener, you for commercial detergent and rinse aid which simplifies daily use must fill the salt compartment with salt. -
Page 5: Loading The Dishwasher
Loading the dishwasher Top up with rinse aid Economic dishwashing Add the rinse aid to the rinse aid compartment if the dishwasher Run programmes only with a full load is not connected to an automatic dosing system for commercial Wait to run a programme until the dishwasher is full, this way you rinse aid. - Page 6 Upper basket Place glasses, cups, bowls, side plates and saucers in the upper basket. All dirty surfaces should face inwards and downwards! Wine glasses are placed on the wine glass shelf and knives are placed in the knife stand on the right (if fitted). Lower basket Place plates, side plates, serving dishes, pots and cutlery (in the cutlery basket) in the lower basket.
-
Page 7: Using The Dishwasher
Using the dishwasher Fold-down section for small items Automatic dosing system The cutlery basket has a fold-down section in the middle for small The dishwasher can be connected to an automatic dosing system items, or small shafts, such as electric whisk attachments. for commercial detergent and rinse aid which simplifies daily use and reduces the risk of overdosing. - Page 8 Eco wash NOTE! This programme is intended for cleaning normally dirty dishes Only use powder and liquid dishwasher detergent in the and is the most effective programme in terms of combined energy dishwasher’s detergent compartment. Dishwasher tablets are and water consumption. This results in a longer programme time. not recommended.
- Page 9 Starting the dishwasher Stopping or changing a programme Press and hold Start/Stop until the display shows “Program A programme should only be interrupted if it is absolutely started”. This indicates that the dishwasher is ready to start. Close necessary. the door properly, or the dishwasher will not start. Open the door, press and hold Start/Stop for three seconds if you want to interrupt the programme after you have started the NOTE!
-
Page 10: Settings
Settings 1. Function Menu Open the Function Menu: Button press Description Turn off the machine. Open the door. Press and hold the main power switch until the display lights up. Within 20 seconds; - press the button Drying 5 times. - press the button Delayed start 5 times. - Page 11 You can change the following settings in the Function Menu: Settings Options 1. Language English/Svenska/Dansk/Norsk/ You can choose the language used for the display. Suomi/Français/Deutsch/Italiano/ Español/Nederlands/Русский 2. Temp. in last program The washing water’s highest temperature in the last run programme is shown in the display.
- Page 12 Settings Options 12. Water connection Water connection: Single/Mix Select Single if the dishwasher is connected to cold or hot water. Select Mix if the dishwasher is connected to both cold and hot water. 13. Create program Design your own dishwashing programme (Program A, Program B and Program C) according to your business’s specific needs.
-
Page 13: Care And Cleaning
Care and cleaning NOTE! WARNING! The dishwasher must not be used without the filters in place! The property’s main power switch must be switched off or power to the socket turned off while work is being carried out! Dishwashing results may be affected if the coarse filter is incorrectly fitted. - Page 14 Spray arms Door Holes and bearings can sometimes become blocked. Remove When cleaning the edge around the door, use only a slightly any debris using a pin or the like. The spray arms also have holes damp cloth (with a little cleaner if necessary). underneath.
-
Page 15: Troubleshooting
Troubleshooting Front display Type of fault on the Action display Overfilling 1 Clear the drainage pump. See the section Care and cleaning. If the problem persists, call the service department. Water outlet fault See “Water remains in the dishwasher” in the table “Problem” below. If the problem persists, call the service department. - Page 16 Problem Possible causes Action The dishes are not clean. The spray arms do not rotate. Remove the arms and clean them. Check that the dishes are not blocking the spray arms. Old detergent. Detergent is a perishable Avoid large packages. product.
- Page 17 Problem Possible causes Action Residue from the detergent remains in the The Function Menu is set incorrectly. Check that the Spray pressure setting under dishwasher. Automatic dosing system is set correctly. Check that the Spray pressure setting under Program A, Program B and Program C is set correctly.
- Page 18 Problem Possible causes Action The dishes are not dry enough. The dishwasher is not fully loaded. Fully load the dishwasher. Rinse aid needs topping up or dosage is set Top up or increase the rinse aid dosage. See too low. section Before washing for the first time and “Rinse aid”...
-
Page 19: Technical Information
Technical information Technical data Brand: ASKO Height: 817-872 mm Width: 596 mm Depth: 559 mm Weight: 52 kg Capacity: 13 Place settings Water pressure: 0.03–1.0 MPa 0.3–10 kp/cm 3–100 N/cm Electrical connection: See serial number plate Rated power: See serial number plate... -
Page 20: Installation
Installation 1198 [mm] 30-94 *Remove locking nuts for an installed height of 820-821 mm. Safety instructions Transport protection for the door Connections to electricity, water and drainage must be Do not forget to remove the transport protection for the door when performed by a qualified professional. - Page 21 C. Partially built-in Suggested machine installations If the dishwasher is located so that one of its sides is visible, a The dishwasher can be installed built-in, completely freestanding side panel must be fitted. Accessories can be purchased where or partially built-in. Check that there is an air gap of 3 mm between you bought the dishwasher.
- Page 22 6 Slide the dishwasher into place. Figure 1 Pull through the drainage and supply hoses when the machine is slid into place. Also pull through the hoses and Min. 14 mm wiring for the automatic dosing system, if one is connected. Check that the hoses have no kinks or sharp bends, and check that there is nothing that can damage the hoses.
- Page 23 Once the installation is complete, the stopcock should be opened 4 Connection to cable for rinse aid pulse (230 V). to allow the pressure to settle for a while and to check that all In section Settings on page 10 the process for activating an connections are tight.
- Page 24 Adjusting the plinth (only when using Set the correct plinth depth as follows toe kick accessory) The dishwasher is supplied with one or two toe kicks depending on the model. The table shows which toe kick you should use depending on the recess height and plinth depth. Recess height (mm) Plinth depth (mm) Low toe kick...
-
Page 25: Service
Service Read chapter Troubleshooting before contacting the service department. Note down the details on the serial number plate positioned on the right inside the dishwasher. Note down the item number (1) and serial number (2). ART. NO. SERIAL NO. -
Page 26: Programme Chart
Programme chart... -
Page 27: Your Notes
Your notes... - Page 28 Quick guide Asko DWC5926 Load the baskets Check that the spray arms can rotate freely Check/add detergent and rinse aid Check/add detergent and rinse aid to achieve good washing and drying results. Check/add salt Top up salt to achieve good washing and drying results.