Asko DW20.1 Service Manual page 24

S E T T I N G S S E T T I N G S S E T T I N G S S E T T I N G S S E T T I N G S
DW20.3
S1 L1 L2
Panel type DW20.3, L = LED, S = Push-button
S3a Washing in both baskets
Both-basket washing (basic setting). The
machine's upper and lower baskets are loaded
with items to be washed.
b Washing in the upper basket
Most of the process water is directed by the
spray arm divider to the upper spray arm.
c Washing in the lower basket
Most of the process water is directed by the
spray arm divider to the lower spray arm.
S4 Temperature selection
LED lights when high temperature is selected.
S5 Delayed start
Programme start delayed by five hours.
S6 Drying selection
(LED lights when long drying is selected)
Long and Normal drying (Quick wash: Long and
no drying).
S7 Express
Variant 1 (certain markets)
Reduces main wash and rinse temperature by
10°C, and shortens the drying time eight minutes.
For certain markets the Express function is
basically activated in Normal wash.
Super rinsing
Variant 2 (certain markets)
Adds two rinses.
24
L3 L4 L5 L6
S3 S4 S5
Variant setting
If the control unit is replaced, the machine will
automatically be in the variant setting menu when
the power supply is switched on for the first time.
Fill the machine with appr. 1 litre of water!
1. Press the Programme button (S1, repeatedly
until the desired variant is selected):
L1 lit: Variant Express option (S7) Also valid
for 3 buttons design.
L2 lit: Variant Super rinse option (S7)
2. Confirm your choice by pressing Start (S2).
The machine senses the presence of the
turbidity and pressure sensors and the spray
arm divider. The programme returns to the
main menu.
If you wish to access the variant settings menu
again:
Fill the machine with appr. 1 litre of water!
1. Turn off the main switch (I/0)
2. Wait for at least 5 seconds
3. Keep the Programme/Start buttons
(S1&S2) depressed
4. Turn on the main switch (I/0)
5. Release the Programme/Start buttons
(S1&S2) at once! Proceed with point 6
within 5 sec!
6. Press Start (S2) three times in a rapid
succession. L1 or L2 is flashing
7. Select variant with S1
Confirm your choice by pressing Start (S2).
The programme returns to the main menu.
S6 S7 S2