Extended Rise; Extended Bake; Bake Only - Kenwood Rapid-Bake BM300 series Instructions/Recipe Book

Extending the Rising Cycle
The final rising cycle can be manually extended by up to 20minutes if desired. The
and ¹.
extended rise is available on setting , , , –
The machine will beep 8 times when it reaches the last 5minutes during the final rising
cycle. To increase the rising time press the LOAF pad once during the beeps and the
time will be extended by 10minutes. When the additional 10mins has elapsed the rising
cycle can be reset once more for another 10minutes by pressing the LOAF pad.
The rising time can only be increased twice to a maximum time of 20minutes.
Note: If the START/STOP pad is pressed the program will be cancelled.

Extended Bake

The extended bake feature allows you to lengthen the baking by 20minutes to bake the
loaf a bit longer to get it just how you want it. Extended bake is available on settings
, µ and ¹ and can only be selected during the last 5minutes of the baking cycle on
to
these programs.
The machine will beep 8 times when it reaches the last 5minutes of the baking cycle. To
increase the baking time press the CRUST pad once during the beeps and the time
will be extended by 10minutes. When the additional 10mins has elapsed the baking time
can be reset once more for another 10minutes by pressing the CRUST pad.
The baking time can only be increased twice to a maximum of 20 minutes.
Note: If the START/STOP button is pressed the program will be cancelled.
Bake only (80 minutes)
The bake only program can be selected on its own and can be used : -
a) In conjunction with the dough only cycle.
b) To rewarm or crisp loaves already baked and cooled.
The breadmaker must not be left unattended when using the Bake only program for
rewarming loaves. Manually stop the program when the desired crust colour has
been achieved. Switch off and unplug after use.
9