Extron electronics MTP 15HD A Series User Manual page 22

Pins:
12345678
Pin
1
2
3
4
5
6
7
8
Insert Twisted
Pair Wires
RJ-45
Connector
Figure 11 — TP cable termination
N For proper grounding of DTP26 and CAT 7 cable only,
ensure the shield around each wire pair and the shield
around the DTP26 or CAT 7 cable are all tied to the
RJ-45 connectors on both ends, in accordance with the
connector manufacturer specifications.
N The audio data that is carried on wire pair 3 and 6 is
incompatible with the Extron TPX 88 A, which cannot
switch the audio, output it locally, or break it away.
N Extron Enhanced Skew-Free A/V cable is not
recommended for Ethernet/LAN applications. This
cable is specially designed for compatibility with
Extron Twisted Pair products that are wired using the
TIA/EIA T568A standard.
The green, brown, and blue wire pairs of this cable have
virtually identical lengths and should be used to
transmit the RGB signals.
The orange wire pair of this cable has a different length
and should not be used to transmit the RGB signals.
MTP 15HD A Series • Installation and Operation
TIA/EIA T 568 A TIA/EIA T 568 B
Wire color Wire color
White-green White-orange
Green Orange
White-orange White-green
Blue Blue
White-blue White-blue
Orange Green
White-brown White-brown
Brown Brown
NOTE If you are using Enhanced Skew-Free™ A/V
cable, use the TIA/EIA T568A standard only.
Signal
Red/V. sync+
Red/V. sync-
Mono audio +
Green+
Green-
Mono audio -
Blue+/H. sync+
Blue-/H. sync-
18