Extron electronics MTP 15HD A Series User Manual page 19

Installation and Operation, cont'd
j
DIP switches
Horizontal Sync (H Sync +) switch — Set this
switch up for positive horizontal sync (or positive
composite sync if the Composite Sync switch is on)
or down for negative sync.
Vertical Sync (V Sync +) switch — Set this switch up for
positive vertical sync or down for negative sync.
N
Composite Sync (C Sync) switch — Set this switch up for RGBS
or down to output RGBHV or RGsB video. See the table below.
Input signal
format to the
transmitter
Component
Sync-on-Green (SOG) switch — Set this switch up for RGsB
video (when the input is RGBHV or RGBS) or down to output
RGBHV, RsGsBs, or RGBS video. See the table above.
Video switch — Set this switch up for RsGsBs, RGsB,
component/S-video/composite video or down to output
RGBHV or RGBS video. See the table above.
N
MTP 15HD A Series • Installation and Operation
15
For H Sync + and V Sync +, most devices use
negative sync.
Output signal
format from
the receiver
RGBHV
RGBHV RGBS
RGsB
RGBS
RGBS
RGsB
RsGsBs RsGsBs
RGsB RGsB
Component
S-video S-video
Composite Composite
Set the Composite Sync, SOG, and Video DIP switches
as shown in the table above for the various input and
output video formats.
Receiver's DIP
switch settings
C Sync SOG Video
ON
1 2 3 4 5 6