Do Not Disturb - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Do not disturb

When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND..
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.
Using Touch Tones (DTMF)
Sometimes you may be urged to enter touch tones
(DTMF) during a call, typically to reach extensions or to
provide a pin code.
In a call,
tap touch tones
Use the
touch tone keypad.
Tap anywhere
outside it to exit.
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Using the EX90
Far end camera control
If the other end
point permits
it, you may
control their
camera. This is
known as Far
end camera
control.
If the other
camera cannot
be controlled,
nothing
happens.
This works in
Point-to-point
calls as well as
MultiSite calls.
Calling the Help Desk
Your videosystem may have been configured with the ability to call for help (Help Desk).
If present, tap the blue icon as outlined.
Scheduled meetings


Tap the name, whose camera
shall be controlled, along the

bottom line ( ) and then tap

Camera Control ( ).
23
User guide
The settings Contact us


Adjust zoom and pan as

required ( ). Tap Back to exit

the menu ( ).
Tap as outlined to call the Help Desk.
www.cisco.com