Two Calls At The Same Time - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Two calls at the same time

Two calls at the same time
In a call tap Hold to
put the current call
on hold ...
You will now be in a call with the You will now be in a call with the
second person, while the first one is second person, while the first one is
on hold. In this example, you talk to on hold. In this example, you talk to
Peer Gynt, while Berlin Sales Office Peer Gynt, while Berlin Sales Office
is on hold. is on hold.
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Using the EX90

Then tap Add ( ),
followed by
Favorites, Directory, or

History ( ) ...
Click on the person
currently on hold
(here Berlin Sales
Office) to be offered
swapping of the calls
or transferring the call
on hold to someone
else.
Optional feature:
If you drag Berlin
Sales Office from the
bottom line and onto
the stage, you will
initiate a MultiSite call
(a video conference)
with yourself, Berlin
Sales Office and
Peer Gynt.
Scheduled meetings


Transfer is available to SIP calls only and
the procedure is shown on the next page.
16
The settings Contact us


... then tap the entry to be called (

finally tap StARt ( ) to place the call.
If your EX90 is equipped
with the optional MultiSite
feature you may also set up a
video conference with three
participants and yourself. See
"Calling participants to set up a
Multisite call" on page 18.
Click on the person
you currently talk to
(here Peer Gynt) to
terminate or transfer
that call.
www.cisco.com
User guide

) and