Cisco EX90 User Manual page 45

Cisco TelePresence System EX90
Contents Introduction
Administrator Settings—Web Snapshots
You may gain access to your video system through its
web interface. To learn more about how to do that consult
the Administration Guide for your system. This guide is
available separately for download from www.cisco.com.
From the web interface you may generate snapshots of
the video stream from your system. You may also, under
certain circumstances, generate snapshots from the
outgoing video of the far end system.
However, you cannot take snapshots unless you have set
the Allow Web Snapshots to ON, as shown here.
Note that the far end may take snapshots of the outgoing
video of your system, even if you have set your system's
Allow Web Snapshots to OFF.
Likewise, you will be able to take snapshots of the
outgoing video of the far end, even if the far end has set
Allow Web Snapshots to OFF, provided that you have
set your own system's Allow Web Snapshot to ON.
Snapshots cannot be taken if the call is encrypted.
Encryption will disable the snapshot feature at both
ends, regardless of the local settings of the Allow Web
Snapshots parameter.
The web snapshot feature applies to Point-to-Point as
well as MultiSite calls (but only to unencrypted calls).
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Scheduled meetings
45
User guide
The settings The settings Contact us
www.cisco.com