Table of Contents
Advertisement
Video Calls
Enable Do Not Disturb
1
Starting from Home screen, use the Cursor keys on the remote
control to select the More icon (>) in the upper left corner of
the screen.
3
Use the Cursor keys on the remote control to navigate down to
Do Not Disturb and use the OK button on the remote control to
set it to On or Off (toggling).
D15097.22 Cisco TelePresence SX10, SX20 User Guide APRIL 2020
All contents © 2020 Cisco Systems, Inc. All rights reserved
2
Press OK on the remote control.
4
Press the OK key on the remote control to exit the menu, putting
changes into effect.
About Do Not Disturb
Your device can be set up so that it
doesn't respond to incoming calls.
When set to Do Not Disturb,
ringtones are muted and call
attempts made by others to reach
you appear as missed calls. You can,
however, place calls.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the device returns to normal
operation), but this may have been
changed to a different setting by
your Video Support Team.
18
Advertisement
Table of Contents
