Connecting A Pc To The Unit - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction
Calling another (optional feature)

Connecting a PC to the unit

Your EX90 has an HD display, which also may serve as your PC screen.
Connect your PC to the sockets on the rear panel as shown below. For optimal
PC image quality, digital output (DVI) from the PC is recommended. If both DVI
and HDMI are connected, a Source button appears in the setup menu on the
touch screen to let you select which source to use as PC screen.
Connect your PC video to
Use as PC screen
Your EX90 has an HD display, which also may serve as your PC screen.
Connect your PC to the sockets on the rear panel as shown above.
Your EX90 will serve as your PC screen outside calls. In a call tap Presentation
to view your desktop. Your desktop is not exposed to the other side before you
press Present.
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Connecting the EX90
 
 
and PC audio to
Using the EX90 Scheduled meetings
Calling another (optional feature)
Setting the screen resolution
A resolution of 1920 × 1200 is recommended. However, other resolutions may
also be used as shown in the below tables.
Digital input via DVI
1920 × 1200 (recommended)
1920 × 1080
1776 × 1000 (not full screen)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1400 × 1050 (not full screen)
1280 × 1024 (not full screen)
1280 × 960 (not full screen)
1280 × 800
1280 × 768 (not full screen)
1280 × 720 (not full screen)
1152 × 648 (not full screen)
1024 × 768 (not full screen)
960 × 600 (not full screen)
800 × 600 (not full screen)
Screen resolution must be set via the web interface, using the Video Output
HDMI [1] Resolution setting. For details on this, see the EX90 Administrator
Guide, which is available separately for download.
Using an external monitor to show presentations
You may connect an external monitor to your EX90 to have it work with two
monitors at the same time. The second monitor can be configured to show
presentations instead of having everything on a single screen.
To enable the use of a second monitor the system must be configured for it.
This is done via the web interface using the Video DefaultPresentationSource
setting. Doing so is described in the EX90 Administrator Guide which is available
separately for download .
8
User guide
The settings Contact us
Analog input via DVI
1
920 × 1200 (recommended)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1280 × 1024 (not full screen)
1024 × 768 (not full screen)
800 × 600 (not full screen)
www.cisco.com