Enable Do Not Disturb; About Do Not Disturb - Cisco TelePresence SX10 User Manual

Video Calls

Enable Do Not Disturb

1
Starting from Home screen, use the Cursor keys on the remote
control to select the More icon (>) in the upper left corner of
the screen.
3
Use the Cursor keys on the remote control to navigate down to
Do Not Disturb and use the OK button on the remote control to
set it to On or Off (toggling).
D1509716 User Guide
Cisco TelePresence SX10, SX20
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved.
2
Press OK on the remote control.
4
Press the OK key on the remote control to exit the menu, putting
changes into effect.

About Do Not Disturb

Your system can be set up so that it
does not respond to incoming calls.
When set to Do Not Disturb,
ringtones are muted and call
attempts made by others to reach
you will appear as missed calls. You
may, however, place calls as much
as you like.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the system will return to
normal operation), but this may have
been changed to a different setting
by your Video Support Team.
18