Cisco TelePresence System EX90
Contents
Introduction
Administrator Settings—SIP Settings
The SIP settings pane lets you specify:
•
Your URI.
•
The Default transport layer, this can be set to tCP,
UDP, tlS or Auto.
•
The Proxy type can be set to Standard, Alcatel,
Avaya, Cisco, Microsoft, Nortel, Experimental,
Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the
case of manual the proxy address must be specified
by you.
•
login name and Password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14724.09
User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
Scheduled meetings
42
User guide
The settings
The settings
Contact us
www.cisco.com