Activate Do Not Disturb; About Do Not Disturb - Cisco TelePresence Touch 10 User Manual

Video Calls

Activate Do Not Disturb

1
Tap in the upper left corner, as shown.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Tap Do not disturb, as indicated. To deactivate the feature,
repeat the procedure.

About Do Not Disturb

Your system can be set to not
respond to incoming calls. You may,
however, use it to call others as
much as you want.
Your video support team may have
set a time-out on this feature,
after which the system will return
to respond to incoming calls as
usual. Default time-out setting is 60
minutes.
15