Cisco EX90 User Manual page 24

Cisco TelePresence System EX90
Contents Introduction
Sharing contents—conducting presentations
You may share contents
while in a call. The EX90
accepts two sources—via
DVI and via HDMI.
Note! You must be in a call to be able to share
contents. Your presentation source must be
powered and active as well as connected.
Otherwise the Presentation icon (button)
will fail to appear.
Tap StOP PRESENtING
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Once you are in
a call—and the
presentation source
is connected, powered
and active—the Presentation
icon (button) will appear.
In a call tap Presentation ...
If you have two sources connected,
you will be presented with the
possibility to swap between these at
any time.
to stop sharing
contents.
Using the EX90 Using the EX90 Scheduled meetings
24
The settings Contact us
... then tap PRESENt to start sharing contents.
www.cisco.com
User guide