Enable Do Not Disturb - Cisco TelePresence SX10 User Manual

12 Availability

Enable Do Not Disturb

Starting from Home screen, use
the Cursor keys to select the
field in the upper left corner of
the screen.
Press the OK key to exit the
menu, putting changes into
effect.
Press the OK key. Use the Cursor buttons to set
Do Not Disturb to On or Off
(toggling).
About Do Not Disturb
Your system can be set to not
respond to incoming calls. You may,
however, use it to call others as
much as you want.
When set to Do Not Disturb, ringtones
are muted and call attempts made
by others to reach you will appear as
missed calls. You may, however, place
calls as much as you like.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the system will return to normal
operation), but this may have been
changed to a different setting by your
Video Support Team.
D1509705 User Guide
Cisco TelePresence SX10, SX20
Produced in November 2015 for CE8.0
All contents © 2014—2015
Cisco Systems, Inc. All rights reserved.