Activate Do Not Disturb; About Do Not Disturb - Cisco Webex DX70 User Manual

Video Calls

Activate Do Not Disturb

1
Tap in the upper left corner, as shown.
D1510422 User Guide
Cisco Webex DX70, DX80
Produced: September 2018 for CE9.5
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Tap Do not disturb to activate the feature. Tap again to deactivate.
18

About Do Not Disturb

Your system can be set to not respond
to incoming calls. You may, however,
use it to call others as much as you
want.
Your video support team may have set
a time-out on this feature, after which
the system will return to respond to
incoming calls as usual. Default time-
out setting is 60 minutes.