To Setup Remote Console Setting - Avermedia IWH3216 Touch User Manual

Name
(17) Full screen
(18) Alarm
6.3.1

To Setup Remote Console Setting

Click OK to exit and save the setting and Cancel to exit without saving the setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour data,
the system automatically replaces the oldest data. In case you have more than one storage path, the system
automatically saves the data to the next storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click Add. To remove the
selected path, click Delete.
If you want the system to automatically erase the data after a certain days, enable the Delete recorded data
after check box and enter the numbers of days in Days text box.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language. By default the
language is in English.
(3) Remote Server
Enter the DVR Server IP and Port number.
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting
Channels section, enable the camera number to receive the camera
signal from the server. In Visible Channels section, enable the camera
number to view the camera signal on Remote Console screen. To
select all the cameras, enable the ALL check box.
Function
Use the entire area of the screen to only display the video.To return, Right click the mouse or
press ESC on the keyboard.
Alert and display warning info. Only Administrator-level can reset and turn on, off and trigger
the Sensor and Relay by right-clicking the item in the Sensor and Relay list.
(1)
(2)
(3)
(4)
129