7.1.1.2 Camera Setting - Avermedia AVerDiGi EXR6004 Mini User Manual

- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to the
next video in cycle depending on the set time gap.
(5) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto Record after system boot up
Automatically start video recording when the DVR is executed.
- Auto start Network after system boot up
Automatically connect to network when the DVR is executed.

7.1.1.2 Camera Setting

Select the camera from remote DVR servers to modify settings. In the Camera Setting window, click
Update to save and apply the new settings, click Exit to exit without saving.
IP Camera Setting
(1)
(2)
(3)
(4)
(5)
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only,
Left click on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won't detect it as video loss error.
(3) Input
Select the type of camera as IP camera. To modify camera of remote DVR, see
Setting.
(4) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can still
record the video and preview it in playback mode.
- Enable Audio
58
Remote DVR Camera