MTU Gas engine8 V 4000 L62 Operating Instructions Manual page 115

151029 – FGT Fail High
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
151030 – Delta P Fail High
Red alarm. Initiated by TecJet.
Cause
Excessive differential pressure
over TecJet detected.
151031 – FGP Fail High
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
151032 – Coil Current Fail High
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
151035 – Position Fail High
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
151036 – Elec Temp Fail Low
Red alarm. Initiated by TecJet.
Cause
Hardware not ready for
operation.
151037 – FGT Fail Low
Red alarm. Initiated by TecJet.
Cause
Gas temperature before TecJet
is below the preset limit value.
Corrective action
u Restart TecJet.
Corrective action
1. Check gas pressure.
2. Check TecJet for dirt.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Restart TecJet.
Corrective action
u Check TecJet and configuration.
MS150032/02E 2012-07 | Troubleshooting | 115