Led Indicators - Motorola MC75 User Manual

LED Indicators

The MC75 has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio
status. Table 2-6 describes the LED indications.
Charging/Battery
Scan/Decode
Status LED
LED
LED Indicators
Figure 2-9
LED Indications
Table 2-6
Scan/Decode LED
Solid Green
Solid Red
Off
Charging/Battery Status LED
Slow Blinking Amber
Solid Amber
Fast Blinking Amber
Off
Single Blink Amber (when Power button pressed)
Blinking Amber (when Power button pressed)
Radio Status LED
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
status and settings, see
Radio Status
LED
LED State
Chapter 5, Using the
Indication
Successful decode/capture.
Laser enabled, scanning/imaging in process.
Not enabled.
Main battery in MC75 is charging.
Main battery in MC75 is fully charged.
Charging error.
Not charging.
Battery depleted.
Battery over-temperature condition.
WAN radios is on.
WAN radio is off.
Data Capture on page 2-29. For information about WAN radio
Phone, or refer to the MC75 Integrator Guide.
Using the MC75 2 - 13