Akai DPS16 Operator's Manual page 140

Chapter 11: Using a Disk (Disk Mode)
Follow the steps below to format or erase the disk.
1. On the Disk List screen, move the cursor to select a hard disk (ATA or SCSI 0-7) to format or erase.
Select a device that has an indication of
field. To format an unformatted hard disk, select a
Status
2. Press the [F1] (
The following screen appears.
1
Disk to FORMAT
Indicates the information on the hard disk selected in step 1 (ID, product name, manufacturer, and version
number).
2
Format operation
Enables you to select a type of formatting (
3. Move the cursor to the
.
ERASE
4. Press the [F6] (
The DPS16 displays the screen that asks you for confirmation to execute the format/erase operation.
Press the
[F1]
5. Press the [F5] (
The DPS16 performs the format or erase operation. When the operation is completed, the screen used to create
a new Project automatically appears.
NOTE :
When a new Project is created, the DPS16 displays the Main screen that indicates the formatted disk as the
current disk and the new Project as the current Project.
128
) key.
FORMAT
Format operation
) key.
DO IT
( CANCEL ) key to cancel the operation.
) key to execute the format/erase operation.
DO IT
Refer to page 112 for more information on how to create a new Project.
NOW SELECTED , NOT FORMATTED
NOT FORMATTED
FORMAT / ERASE ).
field (2), and use the [JOG] wheel to select
, or RECORDABLE DISK
device.
1
2
FORMAT
in the
or