Reloading The Backup Project; Loading From The Scsi Device - Akai DPS16 Operator's Manual

Chapter 10: Project Management (Project Mode)

Reloading the backup Project

Follow the steps below to reload the backup Project from the external SCSI device or DAT recorder onto the
current disk.

Loading from the SCSI device

1. On the Project screen, press the [F1] (
The following screen appears.
2. Set the
Device
The following screen appears.
1
Source disk
This field is used to select a disk that has the stored backup data.
2
Current disk ID
This field indicates the current disk that the backup data to be loaded.
3. In the
Source disk
backup data.
4. Press the [F5] (
The following screen appears.
1
Current disk free
Indicates the free space on the current disk.
2 Project list
Displays the list of Projects stored on the backup disk.
5. Use the cursor to select the desired Project to reload.
NOTE : You cannot reload a Project of a size larger than the free space displayed in the
free field (1).
6. Press the [F5] (
The reload operation starts. When it is completed the display returns to the Project screen.
Press the
[F1]
122
fields to SCSI.
1
2
field (1), select the SCSI ID of the disk from which you wish to reload the
) key.
DO IT
1
2
) key to reload the backup data.
DO IT
( CANCEL ) key to cancel the reload operation.
) key, then the [F5] (
MORE
) key.
RELOAD
Current disk