Copying Data On The Disk - Akai DPS16 Operator's Manual

Chapter 11: Using a Disk (Disk Mode)
Follow the steps below to defragment audio data.
1. On the Disk List screen, move the cursor to the hard disk you wish to defragment.
Select from the devices with the
2. Press the [F5] (
The following screen appears.
3. Press the [F5] (
The DPS16 executes the selected defragmentation method (
Press and hold the
4. When defragmentation is completed, the following screen appears.
Press any key to return to the Disk List screen.

Copying data on the disk

You may copy all data on the current disk to another disk. This is useful when you wish to back up the current
condition of the current disk.
CAUTION :
NOTE :
• Make sure that the available space of the destination disk is larger than the size of the copy data. (You can
check the size of the used space of the current disk in the
• The contents and position of the source data are reflected on the destination "disk". For example, Undo
data stored on the copy source disk will be copied to the destination disk. Also, if the source disk has
fragmentation, it will be reflected on the destination disk.
130
NOW SELECTED
) key.
ALIGN
) or [F6] ( ) key, depending on the method chosen.
FULL JOIN
[F1] ( CANCEL ) key down to cancel the operation.
Data existing on the destination disk will be deleted and replaced with the copy source data.
or RECORDABLE DISK
FULL or JOIN
Current Disk field of the Disk List screen.)
indication in the Status
).
field.