Pitch Shift; Rotary Speaker - Akai DPS16 Operator's Manual

PITCH SHIFT

This effect has a pitch shift with a range of +/– one octave, and can be set for the left channel and the right channel
independently.
Parameter
1 Left *1 –12.99 – +12.99
2
Fdback *2 0 – 127
3 Right *5 –12.99 – +12.99
4
Fdback *6 0 – 127
5 Balance +50 – 0 – –50
6 Effect ON/OFF

ROTARY SPEAKER

This stereo-out effect simulates rotary speakers for organ sound. Use MIDI Control Change messages (input from
the MIDI IN port or the
[F4]
Parameter
1 Rate1 *1 0.1Hz – 10.0Hz
2 Rate2 *2 0.1Hz – 10.0Hz
3
Accel *3 0.1sec – 10sec
4 Init *4 R1/R2
5
MIDIch *5 1 – 16
6 CtrlNo. *6 0 – 127
7 Balance +50 – 0 – –50
8
Effect ON/OFF
Setting range
Adjusts the amount of pitch shift for the L channel.
Adjusts the amount of delay that is fed back on the L channel.
Adjusts the amount of pitch shift for the R channel.
Adjusts the amount of delay that is fed back on the R channel.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
( MANUAL ) key) to switch between two rotation speeds (
Setting range
Adjusts the rotation speed (Rate1) of the speakers.
Adjusts the rotation speed (Rate2) of the speakers.
Adjusts the time (duration) taken for switching from Rate1 to Rate 2.
Sets the initial rotation speed (Rate1/Rate2).
Selects a MIDI channel that receives Control Changes messages.
Sets a Control Change number to be received.
Adjusts the balance between the effect sound and dry sound. (Effect
sound only at a value of +50)
Switches the effect sound output on and off.
Chapter 13: Using the Effects
1
2
3
4
5
6
Function
Rate1 / Rate2 ).
1
2
3
4
5
6
7
8
Function
163