Table of Contents
Advertisement
CUT → INSERT
This command enables you to cut data between the IN and OUT points and insert it after the
position). The source data between the IN and OUT point will be replaced with silence, and the existing data in
the destination after the
Now time
Before edit
INSERT SILENCE
This command enables you to insert silent data after the
field. The existing data after the Now time will move forward by the time duration of the inserted
Insert time
silence.
Before edit
CUT → DISCARD
This command enables you to cut data between the IN point and OUT point. The data is deleted and replaced with
a silence. The existing data after the OUT point is not affected.
Before edit
After edit
will move forward in time.
IN point
1
2
3
1
2
After edit
Silence
Now time
1
2
3
1
2
3
After edit
IN point
1
2
3
1
2
Silence
Chapter 8: Edit Technique (Edit Mode)
OUT point
4
5
6
7
8
5
6
3
4
Now time
Now time
. The time duration of the silence is set in the
4
5
6
7
8
4
5
6
Silence
Insert time
OUT point
4
5
6
7
8
5
6
7
8
Now time
(current
9
7
8
9
9
7
8
9
9
9
95
- Quick Links:
- Features of the Dps16
- Specifications
Hide quick links:
Advertisement
Table of Contents
