Finish Process; Erasing Data From The Cd-Rw Disk - Akai DPS16 Operator's Manual

Finish process

This process writes a data region (readout information), which includes the position data for data and tracks, to the
disc. Until you perform the Finish process, you can continue writing other Projects to the disc. However, the
Finish process must first be performed in order to make the CD-R/CD-RW disc playable on the audio CD player.
(Playable only on the CD-R/CD-RW drives.)
The audio CD player must support the CD-RW disc format to play back the audio from the CD-RW
NOTE :
disc, even if the Finish process has been performed.
1. Press the [F2] (
CD-R
Make sure that the Disc status
not been performed is inserted).
2. Press the [F5] (
FINISH
The DPS16 displays the screen to confirm the execution of the Finish process.
Once the Finish process is performed, further recording to the disc is not possible.
NOTE :
3. Press the [F6] (
DO IT
The DPS16 performs the Finish process. When the operation is completed, the
" ".
FINISHED
Erasing data from the CD-RW disc
You can erase the contents of a CD-RW disc which is in the CD-RW drive for future recording. You can make
recording on such a disc even after you have performed the Finish process with the disc.
You cannot use this operation with a CD-R drive and a CD-R disc.
NOTE :
CAUTION : This operation will erase all data stored on the CD-RW disc. Proceed carefully so that you
will not lose important data.
1. Press the [F2] (
CD-R
2. Press the [F3] (
ERASE
The DPS16 displays the screen for confirming erasure of data from the disk.
3. Press the [F6] (
DO IT
The erase operation starts. When it is completed, the screen returns to the display shown during step 1.
) key on the Project screen.
field indicates "
) key.
) key to proceed with the Finish process.
) key on the Project screen.
) key.
) key to execute the erase operation.
Chapter 10: Project Management (Project Mode)
NOT FINISHED " (a disc for which the Finish process has
Disc status field indicates
117