Table of Contents
Advertisement
Enter the password that is for connecting authority
- Channel
Select the channel of connected camera
7.1.1.3 Record Setting
In the Recording setup windows, click OK to accept the new settings, click Exit to exit without saving, and click
Default to revert back to original factory setting.
Record Setting of IP Camera
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the ALL
check box. To select more than one camera, Right click on the camera icon. To select one camera only, Left
click on the camera icon. The camera icon turns purple when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23
represent the time in 24-hour clock and the
vertical block 1 to 7 represent the day in
the week block (Sunday to Saturday). To
record in full 24 hours and 7 days a week,
select the recording mode and click the
button. If you want to only record at a
particular time or day, click Schedule
button and select the Recording Mode ,
and then click on the time or day blocks.
When the system starts recording a red
triangle mark would appear at the upper
left corner of the screen.
77
Advertisement
Table of Contents
