Table of Contents
Advertisement
8.1.3 To Use the PDAViewer
1. Run the PDAViewer in the Programs.
2. Familiarizing the PDAViewer buttons.
Name
(1) Connect
(2) Split Screen Mode
(3) About
(4) Minimize
(5) Exit
(6) Focus
(7) Full Screen
(8) Snapshot
(9) Zoom
(10) Direction buttons
(2)
(1)
(10)
(9)
(8)
Function
Hook up to the DVR server. Make sure you are connected to internet.
When the iView screen appears, click Add to add DVR server.
Enter the server IP, port, user ID, password and select the connection type. Then, click OK.
User can playback the recorded video from remote DVR server in PDAViewer.(see also
Chapter
8.1.4)
Select between 2 screen display types. It also allows you to switch and view different camera
number or channels.
Display the PDAViewer software version.
Reduce the size to taskbar.
Close the PDAViewer.
Adjust the focus of PTZ camera to produce clear image.
Use the entire screen to only display the video.
Capture and save the screen shot in *.bmp format.
Zoom in and out the PTZ camera image.
Adjust and position the focal point of the PTZ camera.
(3)
(4)
(5)
(6)
(7)
100
Advertisement
Table of Contents
