Record Setup - Avermedia AVerDiGi MOB1304 NET User Manual

8.1.1.3

Record Setup

(1)
(2)
(3)
(1) Record Mode
Select D1/CIF/D1 Enhance recording mode. Under D1 mode, the video recording is in full screen
resolution and takes turns from one channel to the next one when Auto Scan enables. Each
channel is recorded up to a maximum frame rate of 30/25fps(NTSC/PAL). User can switch to
view the video in full screen or QUAD screen. Whereas in CIF mode, video recording is at a
lower resolution, but each video is recorded in 30fps/25fps (NTSC/PAL). User can switch to view
the video in full screen or QUAD screen
(2) Channel Setting
Setup parameters of each channel.
- Enable
Enable/disable the channel to display the video on the surveillance screen. If the channel
is disabling, there won‟t be any video display and recording.
- Record
Enable/disable the channel number to record video.
i
The channels are enabled can be set for video recording.
- Audio Record
Enable/disable audio recording. To record sound, make sure the audio input device (ex:
microphone) is connected to the DVR unit.
- Preview
Enable/disable the video preview on the surveillance screen.
- Max. FPS
Display the maximum frame rate of recording that user has set. Maximum fps total value
depends on the RESOLUTION that user has chosen.
- FPS
Set the number of frames per second to be recorded. The higher the frame rate, it uses
76