Table of Contents
Advertisement
Chapter 1 Installing Hardware
1.7
Upgrading and Setting Up the Software
The DOM (Disk on Module) contains the DX5000 series software. When you get the upgrade
driver CD, please follow the steps below to upgrade the software on the DOM.
Please change your BIOS to make CD-ROM as the 1
the software. Follow the steps to upgrade the software.
1. Insert the upgrade driver CD to the
RD-ROM drive. The installer will
prompt an "Install DX Series into
DOM" screen. Click Yes to upgrade.
2. When the upgrading is in process,
you will see "Install! Wait..." on the
lower-left corner of the screen.
st
boot up drive before you upgrade
20
Advertisement
Table of Contents
