6. Close the heat exchanger cover.
7. Turn the lever until it clicks into position.
8. Put the filter back.
11.4 Cleaning the humidity sensor
Risk of humidity sensor damage. Do not use abrasive materials or steel wool to clean the sensor.
To assure best drying results the appliance is equipped with metal humidity sensor. It is placed on the inner side of
the door area.
Over usage time the surface of the sensor may get dirty which deteriorates the drying performance.
We recommend to clean the sensor at least 3 or 4 times or if you observe the drop of drying performance.
To clean you can use harder side of dishwashing sponge and bit of vinegar or dish soap.
To clean the sensor:
• Open the loading door.
• Clean the surfaces of the humidity sensor wiping off the metal surface several times.
11.5 Cleaning the drum
Disconnect the appliance before you clean it.
Use a standard neutral soap detergent to clean the inner surface of the drum and drum lifters. Dry the cleaned surfa-
ces with a soft cloth.
Do not use abrasive materials or steel wool to clean the drum.
User manual
Caution
Warning
Caution
25
fig.X02252
fig.X03361