Synesso Espresso Machine Technical Manual page 44

PROGRAMMING
Line 1 indicates that you are on the Hot Water Tap control screen.
Line 2 indicates the settable amount of time that the hot water tap will run before shutting off.
Line 3 gives the option of setting the hot water dispersion time by activating the tap and letting the
water flow, then shutting it off. The machine will retain the duration of this pour and dispense for the
same length of time when the hot water switch is activated.
To change the 'Hot Water Tap' time by tenths of a second, press the button associated with line 2.
Use the '▲' '▼' buttons to select the desired time, followed by the line 2 button once again to confirm
the selection. The hot water tap will now dispense hot water for the allotted amount of time.
By selecting the line 3 'Program Time' you may set the desired time by placing the cup size you wish
to fill under the hot water tap, press the hot water button on the top of the machine, let it reach the
desired level and then press the hot water button again. This will automatically set the amount of
water just dispensed as the 'Program Time', and the actual time in seconds will appear on line 2.
To cycle to the next display screen in the menu level, press the button next to line 1.
Technical Manual 44