Presets - Digital Projection M-Vision 930 Series User Manual

Digital Projection
M-Vision 930 Series
Setup menu continued from previous page

Presets

The current image settings can be saved as a preset, which you can recall later.
The default settings can be recalled at any time as well.
Up to four custom presets can be stored for each input.
The following settings are saved in a preset:
•
From the menu —
Image Brightness
Adaptive Contrast , Saturation
•
From the Color menu — Colorspace
and
RGB Lift RGB Gain
•
From the menu —
Geometry Aspect Ratio
To recall a saved preset:
•
Highlight Recall Preset and then use the
buttons to select preset , , ,
A B C D
To save a preset:
•
Highlight Save Preset and then use the
buttons to select preset A , B , C , or
Press to leave the page.
MENU

Presets

Alternatively, you can recall presets A
on your remote control.
Rev B July 2014
, , ,
Contrast Gamma
, Hue , Sharpness and Noise Reduction
, Color Temperature , Color Gamut
and
Overscan
LEFT and RIGHT arrow
, or .
Default
LEFT and RIGHT arrow
D .
, B and C with the USER MEMORY buttons
USING THE PROJECTOR
Setup >> Presets >>
Recall Preset
Save Preset
,
ON POWER OFF
|
SOURCE
Select Item Adjust
1 2
4 PIC
MUTE
ENTER
ASPECT
MENU
USER MEMORY
1 A B
SHARP
GAMMA O-SCAN
buttons on the remote control
1 USER MEMORY
BRI-C C-TEMP TEST
3D
2D/3D
SWAP FORMAT
Default
Preset A
[Menu] Return
3
6
RATIO
C
NR
3D
Operating Guide
Notes
Presets from one input cannot be
applied to another input.
65