Lamps Menu - Digital Projection M-Vision 930 Series User Manual

Digital Projection
M-Vision 930 Series

Lamps menu

•
Lamp Mode
Eco will automatically set the lamp power to 80%.
to 92%.Set to if you wish to adjust the power manually, from 80% to
Power
100%.
•
Power
Use the slider to set lamp power. This setting is only available if
is set to .
Power
•
Lamp Select
Choose between Single , Dual , Lamp 1
•
High Altitude
increases the fan speed to compensate for reduced air density at high
On
altitude.
The following menu items show information only:
•
Lamp1 Status , Lamp2 Status
•
Lamp1 Hours , Lamp2 Hours
Rev B July 2014
USING THE PROJECTOR
Normal will set the power
Lamp Mode
and Lamp 2 .
LAMPS >>
Lamp Mode
Power 20 (100%)
Lamp Select
High Altitude
Lamp1 Status: ON
Lamp2 Status: ON
Lamp1 Hours: 76 HRS
Lamp2 Hours: 76 HRS
Select Item Adjust
Power
Dual
Off
[Menu] Return
Operating Guide
Notes
61