Network - Digital Projection M-Vision 930 Series User Manual

Digital Projection
M-Vision 930 Series
Setup menu continued from previous page

Network

Set DHCP to On if the IP address is to be assigned by a DHCP server, or
to be set here.
•
If DHCP is set to On , it will not be possible to edit
or .
Gateway DNS
•
If is set to :
DHCP Off
1. Edit IP Address , Subnet Mask
2. Select Apply Settings and press
Standby Power
If this setting is On , the LAN socket remains active when the projector is in
STANDBY mode. If the setting is Off , the LAN socket is disabled when the
projector is in STANDBY mode.
Rev B July 2014
Off
IP Address , Subnet Mask
, Gateway and DNS as required.
ENTER .
USING THE PROJECTOR
Setup >> Network
DHCP
if it is
IP Address
Subnet Mask
,
Gateway
DNS
Apply Settings
Standby Power
LAN Status :
MAC
Select Item Adjust
Off
192. 168. 0. 100
255. 255. 255. 0
0. 0. 0. 0
0. 0. 0. 0
< Execute >
Off
Ready
00:18:23:28:F1:01
[Menu] Return
Operating Guide
Notes
63