Honda NSR150SP Manual page 67

NSR150SP
______________________________________________
SUSPENSION
Loose, worn, or damaged suspension parts
impair motorcycle stability and control. Repair
or replace any damaged components before
riding. Riding a motorcycle with faulty
suspension increases your risk of an accident
and possible injury.
FRONT
Check the action of the forks by
operating the front brakes and compressing the front suspension several times.
Check the entire fork assembly for signs of leaks, damage or loose fasteners.
Replace damaged components which cannot be repaired.
Tighten all nuts and bolts.
Refer to section 13 for front fork service.
REAR
Support the motorcycle securely using
safety stand or hoist and raise the rear
wheel off the ground.
Check for worn swingarm bearings by
grabbing the rear wheel and attempting to
move the wheel side to side. Replace the
bearings if any looseness is noted.
Check the action of the shock absorbers
by compressing them several times.
Check the entire shock absorber
assembly for signs of leaks, damage or
loose fasteners.
Replace damaged components which
cannot be repaired. Tighten all nuts and bolts.
Refer to section 14 for shock absorber service.
NUTS, BOLTS, FASTENERS
Check that all chassis nuts, bolts and
screws are tightened to their correct
torque values at the interval shown in
the Maintenance Schedule.
Check that all cotter pins, slip clips,
hose clamps and cable stays are in
place and properly secured.
3-25
http://mototh.com
Maintenance