NSR150SP
_______________________________________________
INSPECTION
LIFTER PLATE BEARING
Check the lifter plate bearing for damage.
Turn the bearing inner race with your finger.
The bearing should turn smoothly and quietly
without play.
Also check that the bearing outer race fits in
the plate. Replace the bearing if necessary.
CLUTCH SPRING
Measure the clutch spring free length.
SERVICE LIMIT: 33.6 mm (1.32 in)
NOTE
•
Replace the clutch springs as a set.
CLUTCH DISC
Check the clutch discs for signs of scoring
or discoloration.
Measure the thickness of the discs.
SERVICE LIMITS:
A: 2.5 mm (0.098 in)
B: 2.2 mm (0.086 in)
NOTE
•
Replace the discs and plates as a set.
CLUTCH PLATE
Check the plate for excessive warpage or
discoloration. Check the plate warpage on
a surface plate using a feeler gauge.
SERVICE LIMIT: 0.20 mm (0.?? in)
NOTE
•
Replace the discs and plates as a set.
Clutch/Gearshift Linkage
10-8
http://mototh.com
/Kickstarter