Honda NSR150SP Manual page 61

NSR150SP
______________________________________________
Inspect the drive chain for possible
damage or wear. Replace any chain that
has damaged rollers, loose fitting links, or
other wise appears unserviceable.
Installing a new chain on badly worn
sprockets will cause the new chain to wear
quickly. Inspect and replace sprockets as
necessary.
Lubricate the drive chain with #80 - 90 gear
oil. Wipe off the excess chain oil.
SPROCKET
Inspect the drive and driven sprocket teeth
for damage or wear.
Replace if necessary.
Never use a new drive chain on worn
sprockets. Both chain and sprockets must
be in good condition or the new
replacement chain wilt wear rapidly.
Check the attachment bolt and nuts
on the drive and driven sprockets. If any
are loose, torque them.
REPLACEMENT
Remove the swingarm and replace the drive
chain.
DRIVE CHAIN SLIDER
Check the drive chain slider for wear or
damage.
Replace the drive chain slider if it is worn to
the indicator.
CAUTION
•
If the chain slider becomes worn through to the
swingarm, the chain will begin to wear against
the swingarm.
3-19
http://mototh.com
Maintenance