Honda NSR150SP Manual page 36

NSR150SP
Frame/Body Panels/Exhaust System
______________________________________________
Disconnect the headlight 3P connector
and front turn signal connectors.
Remove the speedometer cable form the
hole on the upper cowl.
Remove the screws and upper cowl.
•
NOTE: At removal, be careful not to damage
the tabs on the cowls. (page 1-18)
Installation
NOTE:
•
Route the cables and wires properly.
•
At installation, be careful not to damage the
tabs on the cowls.
Install the upper cowl aligning the holes
on the upper cowl with the tabs on the
frame.
Install the speedometer cable to the hole
on the upper cowl.
Connect the headlight 3P connector and
front turn signal connectors.
Connect the speedometer cable to the
speedometer.
AIR GUIDE
Right Air Guide
Remove the upper cowl. (page 2-9)
Disconnect the tachometer cable from the
tachometer.
2-10
http://mototh.com