Honda NSR150SP Manual page 118

NSR150SP Engine Removal/Installation
______________________________________________
Install the drive sprocket setting plate
onto the counter shaft and align the
bolt holes on the plate with the holes
of the sprocket.
Install and tighten the new drive
sprocket setting plate bolts to the
specified torque.
TORQUE: 10 N.m (1.0 kgf.m, 7 lbf.ft)
Install the drive chain guard to the
drive sprocket cover.
Install the drive-sprocket-cover and
tighten the bolts securely.
7-7
http://mototh.com