Oven Elements - Fisher & Paykel Titan AeroTech OD302-B Service Manual

Service Manual 599337A: 302B Series Titan Oven

7.15 Oven Elements

Broil / Grill Element
Location: Top of the oven cavity
Removal
1. Remove the fan shroud. (refer to Section 7.19)
2. Remove the screws securing the Broil / Grill element to the top of the oven cavity and
the support frame to the cavity roof.
3. Pull the Broil / Grill element through the hole in the oven cavity until the element
terminals are accessible.
Note: Tilt the element forward so that the element terminals will clear the hole in the
oven cavity.
4. Disconnect the wires and connect to the replacement element.
Reassembly
Refit in reverse manner.
Check the element operation. (refer to Diagnostics Section 4.3)
Fan Element
Location: Rear of the oven cavity
Removal
1. Remove the fan shroud. (refer to Section 7.19)
2. Remove the screws securing the fan element to the rear of oven.
3. Pull the element through the hole in the oven cavity until the wires are accessible.
4. Disconnect the wires and connect to the replacement element.
Reassembly
Refit in reverse manner.
Check the element operation. (refer to Diagnostics Section 4.3)
54
July 2006