Related Manuals for Fisher & Paykel OB24SDPX2
Summary of Contents for Fisher & Paykel OB24SDPX2
-
Page 1: Installation Instructions
Built-in oven Installation instructions OB24SDPX model User guide Four encastré Instructions d'installation OB24SDPX model Guide d’utilisation US CA... -
Page 2: Important - Please Read And Follow
Dear Customer, Thank you for having purchased and given your preference to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance. Please preserve this booklet carefully. -
Page 3: Important Precautions And Recommendations
USER INSTRUCTIONS IMPORTANT PRECAUTIONS AND RECOMMENDATIONS ✓ After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a professionally qualified technician. ✓ Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries. -
Page 4: Control Panel
control panel Fig. 1.1- Oven controls: 1. Function selector knob 2. Electronic programmer 3. Temperature knob (potentiometer) 4. Door locked pilot light 5. Oven heating pilot light 6. Oven on pilot light WARNING - VERY IMPORTANT NOTE: The temperature knob (potentiometer) turns to right and left only to symbols + and -. Forcing the turning could damage the temperature knob. -
Page 5: Self Cleaning Oven
how to use the self cleaning oven GENERAL FEATURES Attention: the oven door becomes very hot during operation. The oven has special operating features. Keep children away. Five different functions can be used to satisfy all cooking needs; it also has a self clean- ing function which can clean the oven cavity at high temperature, a defrost function and an oven light function. -
Page 6: Selecting The Functions
SELECTING THE FUNCTIONS (fig. 2.1) The cooking function is selected by turning the function selector knob and matching the mark with the symbol printed on the print (or the symbol with the mark printed on the print). Important: In all cooking functions the oven must always be used with the DOOR CLOSED. - Page 7 TRADITIONAL CONVECTION COOKING The upper and lower heating elements switch on. The heat is diffused by natural convection and the temperature must be set between 120-°F (50 °C) and 480 °F (250 °C). On selecting this function the electronic program- mer starts cooking with a pre-heating temperature set at 350 °F (200 °C).
-
Page 8: Self-Cleaning Function
SELF CLEANING FUNCTION (this is not a cooking function) IMPORTANT NOTES: This is not a cooking function but is only used to clean the oven. Before starting the self cleaning cycle: - Take all the accessories out of the oven (broiling pan and shelves). - Page 9 SELECTING °F/°C ON THE DISPLAY Turn the oven selector knob to a cooking function (i.e. Press key 5 on the programmer to reduce the temperature until you reach the minimum value (120 °F/50 °C). ➀ With °F/°C flashing on the display press key 5 again (if °F/°C is not flashing press key 4 before pressing key 5) until OFF appears on the display.
-
Page 10: Setting The Cooking Temperature
SETTING THE COOKING (ONLY FOR THE COOKING FUNCTIONS) Programmer NOTE: The temperature knob (potentiometer) turns to right and left only to symbols + and -. Forcing the turning could damage the temperature knob. The temperature set is shown on the electronic program display and can be var- ied, with 5 °F (5 °C) intervals, by means of the temperature knob (potentiometer) or the program keys. -
Page 11: Very Important
HOW TO START THE SELF CLEANING CYCLE Important: the self cleaning cycle must only be performed with the oven empty; so, before starting the cycle take all the accessories (shelves, broiling pan, ...) out of the oven cavity and dry any traces of overflowed liquid. Do not use any degreasing products (e.g. - Page 12 PROBLEMS ON STARTING AND DURING THE SELF CLEANING CYCLE door Steady The function selector has been turned to the self cleaning position with the oven door open or not perfectly closed. Or the door has been opened before the cycle has been started with confirmation from key 3 What to do: Close the door and repeat previous cycle.
- Page 13 HOW TO STOP THE SELF CLEANING CYCLE Turn the function selector to (OFF) If the oven cavity temperature is higher than 570 °F (300 °C) 1a. The time of day appears steadily on the program display. 1b. When the oven cavity temperature drops below 570 °F (300 °C): appears on the program display again ➀...
- Page 14 ABNORMAL SITUATIONS AND/OR OPERATION PROBLEMS during cooking or the self cleaning cycle. 30 F0 30 F1 appear during the cooking or self cleaning cycle Oven temperature sensor broken or not working properly. The cooling fan stays on and if the self cleaning cycle is in progress the door remains locked. What to do: 1.
-
Page 15: Cooking Advice
COOKING ADVICE WARNING!! STERILIZATION Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the WARNING following way: VERY IMPORTANT a. Turn the switch to position b. Set the thermostat knob to position 350 °F (175 °C) and preheat the oven. It is advisable to han- c. - Page 16 1 STEP 2 STEP 3 STEP 4 STEP Fig. 2.2 BROILING Very important: the broil element must always be used with the oven door closed. – Position the shelf on the first or second level from the top (fig. 2.2). –...
-
Page 17: Setting The Time
how to use the electronic program- The electronic programmer is a device which groups together the following functions: – 12 hours clock with illuminated display (P on the display for PM time indication). – Timer (up to 23 hours and 59 minutes). –...