Fisher & Paykel Titan AeroTech OD302-B Service Manual page 59

Service Manual 599337A: 302B Series Titan Oven
Door Inner Assembly
Glass Pane removal
1. Remove the four screws securing the top retaining bracket. (no. 1)
2. Loosen the five screws on the insulation retainer panel. (no. 7)
3. Slide out the heat reflective glass pane. (no. 5)
4. Remove the inner glass pane and gasket. (no's 3 & 4)
Note: If transferring the gasket to a replacement glass pane then ensure the gasket
join is located at the top of the door.
Note: The glass pane has a reflective coating on one side only. Ensure that the
coating is facing the oven cavity when reassembled.
To test if a glass pane has a heat reflecting coating, use an ohmmeter to test for
continuity on the glass surface. If there is continuity then the glass will be coated.
Reassembly
Refit in reverse manner.
Ensure all glass surfaces are clean.
Figure 7.22a
59
July 2006