Electrical Connection; Secure The Oven To The Cabinetry - Fisher & Paykel OS30NPX1 Installation Manual

Combination steam oven
Hide thumbs Also See for OS30NPX1:
Table of Contents

Advertisement

Available languages

Available languages

ELECTRICAL CONNECTION

Before connecting the oven to the mains power supply, check that:
specifications of the electrical system match with what is detailed on this section.
z
system has an effective ground connection compliant with current standards and laws.
z
The ground connection is required by law. The cable must not, at any point, reach a
temperature greater than 122°F (50°C) above room temperature.
This oven must be connected to the electricity through a power supply cable and plug
that is compatible with the outlet of the electrical system that powers this oven. If a
fixed appliance does not have a power cord and plug, or another device that ensures
disconnection from the mains, with an opening distance of the contacts that allows complete
disconnection, such disconnection devices must be provided in the power supply mains
conforming to the installation rules.
The omnipolar socket or switch must be easy to reach when the appliance is installed.
Note: The manufacturer declines all liability if the usual accident prevention standards and
the above instructions are not followed.
MAX POWER (W)
HZ
3000
60 Hz
2250
60 Hz
cable from
power supply
red wires
green grounding
oven wires -
UL - listed conduit
factory taped
connector
VOLTAGE (V)
AMPS (A)
120/240V
12.5
120/208V
10.8
wall wiring
box
white wires
black wires

SECURE THE OVEN TO THE CABINETRY

Do not lift the oven by the door handle.
z
Do not over-tighten the screws.
z
Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing
z
difficult. Fisher & Paykel will not cover the costs of removing the oven, or of damage
caused by this removal.
Take care not to bend the tabs for the lower trim while installing the oven.
z
1 Position the oven in the prepared cavity. Make sure the oven is centered and level.
2 Open the oven door fully.
3 Mark and pre-drill the screw holes.
4 Place the supplied washers onto the mounting screws, then use to secure the oven to
the cabinetry.
7

Advertisement

Table of Contents
loading

Table of Contents