Software Version; Display Backlight - Roberts Gemini RD-45 User Manual

Software version

The software display cannot be altered and is just for your reference.
1. Press and release the On/Off button to switch on your radio.
2. Press and release the Menu button.
3. Press and release the Tuning Up or Down buttons until the display
shows 'SW version'.
4. Press and release the Select button. The display shows the software
information.
5. Press and release the Menu button to exit the software display.

Display backlight

1. When using your radio on batteries, the display backlight will be switched
on for approximately 12 seconds when any button is pressed.
2. When your radio is powered by AC mains the display backlight will
always be switched on.
19
or Select
SW version
2,5
SW version
dab-mmi-FS2052-0
3
3
4